How to iron clothes and bedding: we facilitate the process

What mistress does not dream of quickly ironing all clothes and lingerie, especially when you have to do it daily and in large quantities? These tips will seem obvious to someone, but will surprise someone. In any case, even simple rules for working with iron and various fabrics should be freshened up.

Iron mode and fabric features

In order not to spoil the product with an iron, carefully examine its label. As a rule, all the necessary information is set forth in it in the form of symbols.

General rules for different types of fabric:

1. Ironing cotton is quite simple; both dry mode and steaming are suitable for it.
2. For viscose - only dry ironing at a moderate temperature.
3. Flax is easily creased, so the smoothness of matter is achieved only with steaming and at high power.
4. It is better to iron a synthetic cloth through gauze at a moderate temperature, there is a risk of burning the product with a hot iron.
5. Wool from high temperatures shrinks and glossy unsightly, so it is ironed through a layer of damp cloth.
6. Silk products are rather delicate, they are better ironed in a wet state, but you need to use steaming or a spray gun with caution - stains may remain. It is better to wrap the cloth in a damp towel and stand it for half an hour.
7. Some materials stretch and deform easily, such as jersey and knitwear. When ironing such things, do not press the iron too much and make sudden movements. After the procedure, it is not recommended to immediately hang or put on a thing, let it cool.
8. Terry items of linen and wardrobe should not be ironed at all, otherwise they will quickly lose their softness and hygroscopicity.
9. Fleecy fabrics are ironed strictly from the inside out: plush, velvet, velor, types of drape can become “crushed” and less beautiful.
10. Do not experiment with nylon. It is enough to moisten such a thing and allow to dry in a straightened state.

You also need to consider the presence of decor on the product. Embroidery, sequins and other finishes are a sure sign that the thing is ironed from the inside out.

Tip
Why are fabrics ironed predominantly from the inside? The reason for this is the shiny trace of the iron. This technique can be used on chintz when gloss is the main characteristic of the fabric.

As practice shows, following the instructions solves many problems. Things quickly become unusable or fade if you use high temperatures, crush, wet too much. Even ironing according to the rules will spoil the product over time, so try to avoid the iron whenever possible. But you still don’t need to abandon the device: it allows you to destroy microbes if the product was washed in cold water.

Linens

Working with bulky items requires a wide, long and stable ironing board. Buy such a device, and save a lot of time and nerves. Modern boards also have a laundry basket, which is also very convenient.

How to iron the sheets quickly and with pleasure:

1. Include pleasant music (it really helps a lot), a new or favorite movie.
2. First heat the sole of the iron, and then proceed to ironing.
3. Fold volume products 4 times and walk on each side.
4. If desired, unfold the laundry and smooth the creases.

Some materials are ironed much better with a steaming function. Cotton sheets and pillowcases should not be dried at all, but ironed in a slightly damp state.

Tip from purityis.decorexpro.com/en/: Place your ironing board near the window.Daylight will allow you to see all the folds and quickly deal with them. For right-handed people: the light falls on the left side, the outlet and the iron are on the right. For lefties, the opposite is true.

Ironing clothes: small and big secrets

One of the most resistant to iron elements of the wardrobe is a shirt. Of particular difficulty are the sleeves and cuffs. It is better to stock up on the arm sleeve - a special stand for ironing small parts without creases. If there is no device, then it is easy to replace it with a towel folded into a roll. The cuffs are ironed open, the collar is on both sides through wet gauze. Last of all, we work with the back.

How to work with edges and pockets on clothes:

1. Align the parts in the usual way.
2. On top we apply wet gauze, folded in several layers.
3. We put an iron on it and press a couple of seconds.

Another interesting tip: first go through the iron across the material, and then along. Skirts and dresses are easier to start ironing from the belt, moving to the bottom of the hem. Feel free to use the narrow end of the board: don’t wear a hem on it, so as not to smooth out the longitudinal folds.

Features of ironing trousers:

1. We work with each leg separately. For the arrows to match, you need to fold the trousers and mark their location.
2. First, iron the seams and pockets, as well as the lining.
3. We move the iron from the bottom up.
4. The arrows will last longer if you walk through the fabric with dry soap and from the front with an iron through a damp cloth moistened with a solution of vinegar.

Line up ironing things from different fabrics. Start with delicate ones that require a low temperature. This is lace, silk, wool. Gradually switch to durable materials, changing the regime. As modern irons heat up faster than they cool, and the accuracy of the mode will be higher.

How to dry things

How a thing dries can greatly simplify the process of ironing. Do not hang products with an accordion; avoid throwing them over a clothesline. Shake the washed clothes and linen, straighten the folds, then fasten the clothespins to the rope or hang on the shoulders, and better laid out on a horizontal surface. To make heavy fabrics dry faster, place a terry towel under them.

Things need to be taken out of their pelvis or drum immediately after washing. The longer they lie, the higher the likelihood of creases.

An important role is played by the choice of technology. Modern cars are equipped with a function of protection against creasing and “smoothing”. An iron of Soviet times is unlikely to achieve the perfect result. The more functions the device has, the easier and faster the ironing process will be. With cool technology, the desire to do the housework arises on its own.